Discussion:
[fedora-arm] Fedora 27 (aarch64) on Pine Rock64
Leah Anderson
2018-03-15 03:59:42 UTC
Permalink
Hi. I have hopefully an easy question but has anyone gotten Fedora 27 aarch64 to work on the Pine Rock64 (https://www.pine64.org/?page_id=7147)? I installed the image using the instructions at https://fedoraproject.org/wiki/Architectures/AArch64/F27/Installation. Specifically I made sure to set --target=pine64_plus. The image I pulled was from https://alt.fedoraproject.org/alt/ and was the minimal image. Based on this (https://nullr0ute.com/2017/11/overview-of-aarch64-sbc-support-in-fedora-27/) I saw that a serial connection was required but unfortunately I can't seem to get that piece to work. I did also flash an Ubuntu image just to make sure I had the jumpers correct for the serial connection and that did work as expected. I also made sure to set enable_uart=1 in config.txt. Any thoughts would be greatly appreciated :)
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-lea
Peter Robinson
2018-03-15 05:17:25 UTC
Permalink
On Thu, Mar 15, 2018 at 3:59 AM, Leah Anderson
Post by Leah Anderson
Hi. I have hopefully an easy question but has anyone gotten Fedora 27 aarch64 to work on the Pine Rock64 (https://www.pine64.org/?page_id=7147)? I installed the image using the instructions at https://fedoraproject.org/wiki/Architectures/AArch64/F27/Installation. Specifically I made sure to set --target=pine64_plus. The image I pulled was from https://alt.fedoraproject.org/alt/ and was the minimal image. Based on this (https://nullr0ute.com/2017/11/overview-of-aarch64-sbc-support-in-fedora-27/) I saw that a serial connection was required but unfortunately I can't seem to get that piece to work. I did also flash an Ubuntu image just to make sure I had the jumpers correct for the serial connection and that did work as expected. I also made sure to set enable_uart=1 in config.txt. Any thoughts would be greatly appreciated :)
The Rock64 and Pine64 boards are completely different and the process
you followed is for the later which won't work with the former.
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-lea
Leah Anderson
2018-03-15 23:51:06 UTC
Permalink
Well that'd certainly explain the difficulty I was having then. :)

I'll see if I can't go about things a different way. Appreciate the info!
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@li
Peter Robinson
2018-03-17 05:11:12 UTC
Permalink
On Thu, Mar 15, 2018 at 11:51 PM, Leah Anderson
Post by Leah Anderson
Well that'd certainly explain the difficulty I was having then. :)
I'll see if I can't go about things a different way. Appreciate the info!
We'll be improving the Rockchips support in general in F-28, I've not
looked specifically at the Rock64 yet but it's on my list although I
don't have one to test with so keep and eye out ;-)

P
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm
Leah Anderson
2018-03-19 02:16:43 UTC
Permalink
Well if you need someone to test I would be more than happy to :)
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubs

Loading...