David Jones
2016-03-14 09:08:26 UTC
Hi
Installed Fedora-Minimal-armhfp-24-20160312 on Cubox-i 4pro with the
following problems
Trying with as it was with older versions of U-boot
dd if=/tmp/root/usr/share/uboot/mx6cuboxi/SPL of=/dev/mmcblk0 bs=1K seek=1
dd if=/tmp/root/usr/share/uboot/mx6cuboxi/u-boot.img of=/dev/mmcblk0
bs=1K seek=42
U-Boot SPL 2016.03-rc3 (Mar 06 2016 - 23:31:16)
Trying to boot from MMC
bad magic
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
�
using seek=69
U-Boot 2016.03-rc3 (Mar 06 2016 - 23:31:16 +0000)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Board: MX6 Cubox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
auto-detected panel HDMI
Display: HDMI (1024x768)
A distorted image on screen, then system appears to hang. This happens
on both a computer screen and TV, then tried without HDMI connected
screen with append console=ttymxc0 in extlinux.conf
U-Boot SPL 2016.03-rc3 (Mar 06 2016 - 23:31:16)
Trying to boot from MMC
U-Boot 2016.03-rc3 (Mar 06 2016 - 23:31:16 +0000)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Board: MX6 Cubox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
No panel detected: default to HDMI
Display: HDMI (1024x768)
No output to serial console
Regards
David
Installed Fedora-Minimal-armhfp-24-20160312 on Cubox-i 4pro with the
following problems
Trying with as it was with older versions of U-boot
dd if=/tmp/root/usr/share/uboot/mx6cuboxi/SPL of=/dev/mmcblk0 bs=1K seek=1
dd if=/tmp/root/usr/share/uboot/mx6cuboxi/u-boot.img of=/dev/mmcblk0
bs=1K seek=42
U-Boot SPL 2016.03-rc3 (Mar 06 2016 - 23:31:16)
Trying to boot from MMC
bad magic
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
�
using seek=69
U-Boot 2016.03-rc3 (Mar 06 2016 - 23:31:16 +0000)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Board: MX6 Cubox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
auto-detected panel HDMI
Display: HDMI (1024x768)
A distorted image on screen, then system appears to hang. This happens
on both a computer screen and TV, then tried without HDMI connected
screen with append console=ttymxc0 in extlinux.conf
U-Boot SPL 2016.03-rc3 (Mar 06 2016 - 23:31:16)
Trying to boot from MMC
U-Boot 2016.03-rc3 (Mar 06 2016 - 23:31:16 +0000)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Board: MX6 Cubox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
No panel detected: default to HDMI
Display: HDMI (1024x768)
No output to serial console
Regards
David