[fedora-arm] Re: Fedora on Odroid XU4 with Cloudshell LCD

[Josh Boyer]

Hi there,
I've managed (with a lot of help from Stewart Samuels) to get Fedora 24 on
my Odroid XU4. This board is part of the Cloudshell with USB3-SATA (128GB
SSD-Disc) and a 2.2“ TFT LCD with a 320×240 resolution. There is a need of
spi-s3c64xx -> found
fbtft_device -> not found
gpio-ir-recv -> found
gpioplug-ir-recv -> not found
The driver homepage https://github.com/notro/fbtft "The FBTFT drivers are
now in the Linux kernel staging tree". Where can I find the kernel staging?
dnf didn't found kernel-staging or kmod-staging

Fedora doesn't build the majority of the staging drivers. If you need
some of them and can find someone willing to be on the hook for bug
reports against them, then you can open a bug requesting they be
enabled.

josh

[Josh Boyer]

Post by Josh Boyer

Hi there,
I've managed (with a lot of help from Stewart Samuels) to get Fedora 24 on
my Odroid XU4. This board is part of the Cloudshell with USB3-SATA (128GB
SSD-Disc) and a 2.2“ TFT LCD with a 320×240 resolution. There is a need of
spi-s3c64xx -> found
fbtft_device -> not found
gpio-ir-recv -> found
gpioplug-ir-recv -> not found
The driver homepage https://github.com/notro/fbtft "The FBTFT drivers are
now in the Linux kernel staging tree". Where can I find the kernel staging?
dnf didn't found kernel-staging or kmod-staging

Fedora doesn't build the majority of the staging drivers. If you need
some of them and can find someone willing to be on the hook for bug
reports against them, then you can open a bug requesting they be
enabled.

At the last few years there were (at least for i386, x86_64) additional rpm
packages like kernel-staging or kmod-staging from Fedora or RPMFusion. Since
FC23 or FC24 they're missing.

Those aren't from Fedora. Maybe RPMFusion, I don't know.

I've created a bug request.

That's fine, but the hurdle is finding someone willing to deal with the modules.

josh