Discussion:
[fedora-arm] Fedora on Lamobo R1(Banana Pi R1)
f***@centrum.cz
2018-11-25 10:15:51 UTC
Permalink
I try to boot ARM Fedora 29 or Rawhide on Lamobo R1 router and I connect
it by HDMI cable, but it does nothing, ethernet ports don't blink, the
device seems, that don't boot.
When I use old original Bananian image, then device boot up properly,
but Bananian is not developed now, so I want to use Fedora. I look
into dtb directory and I found Lamobo r1 dtb file, so what is wrong.

Thanks,
Filip Bartmann
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/***@lists.fedoraprojec
Peter Robinson
2018-11-25 13:09:29 UTC
Permalink
Post by f***@centrum.cz
I try to boot ARM Fedora 29 or Rawhide on Lamobo R1 router and I connect
it by HDMI cable, but it does nothing, ethernet ports don't blink, the
device seems, that don't boot.
How did you write out the image? What commands did you use, what image
did you use?
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives
f***@centrum.cz
2018-11-25 14:43:14 UTC
Permalink
On Sun, 25 Nov 2018 13:09:29 +0000
Post by Peter Robinson
Post by f***@centrum.cz
I try to boot ARM Fedora 29 or Rawhide on Lamobo R1 router and I
connect it by HDMI cable, but it does nothing, ethernet ports don't
blink, the device seems, that don't boot.
How did you write out the image? What commands did you use, what image
did you use?
Hello I use
https://download.fedoraproject.org/pub/fedora/linux/releases/29/Server/armhfp/images/Fedora-Server-armhfp-29-1.2-sda.raw.xz
image which I unxzip and use dd for write it to new SD card.

Thanks,
Filip Bartmann
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/***@lists.f
Peter Robinson
2018-11-25 14:56:06 UTC
Permalink
Post by f***@centrum.cz
Post by Peter Robinson
Post by f***@centrum.cz
I try to boot ARM Fedora 29 or Rawhide on Lamobo R1 router and I
connect it by HDMI cable, but it does nothing, ethernet ports don't
blink, the device seems, that don't boot.
How did you write out the image? What commands did you use, what image
did you use?
Hello I use
https://download.fedoraproject.org/pub/fedora/linux/releases/29/Server/armhfp/images/Fedora-Server-armhfp-29-1.2-sda.raw.xz
image which I unxzip and use dd for write it to new SD card.
Do you then separately write out the U-Boot firmware? If not you
should use arm-image-installer with the appropriate device target (I
think it should be Lamobo_R1) to setup the firmware for the device.
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/***@lists.f
f***@centrum.cz
2018-11-26 11:04:15 UTC
Permalink
Hello,
thanks, I use arm-image-installer and now device boot as expected.

With best regards,
Filip Bartmann

On Sun, 25 Nov 2018 14:56:06 +0000
Post by Peter Robinson
Post by f***@centrum.cz
Post by Peter Robinson
Post by f***@centrum.cz
I try to boot ARM Fedora 29 or Rawhide on Lamobo R1 router and I
connect it by HDMI cable, but it does nothing, ethernet ports
don't blink, the device seems, that don't boot.
How did you write out the image? What commands did you use, what
image did you use?
Hello I use
https://download.fedoraproject.org/pub/fedora/linux/releases/29/Server/armhfp/images/Fedora-Server-armhfp-29-1.2-sda.raw.xz
image which I unxzip and use dd for write it to new SD card.
Do you then separately write out the U-Boot firmware? If not you
should use arm-image-installer with the appropriate device target (I
think it should be Lamobo_R1) to setup the firmware for the device.
_______________________________________________
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archiv

Loading...