[fedora-arm] Urgent testing request: Raspberry Pi 3 owners

[Adam Williamson]

Hi folks!

It'd be great if anyone with a Raspberry Pi 3 could test out a couple
of prospective builds to go into Fedora 28 Final:

https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel)
https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)

like, soon - within the next couple of hours would be great. Both
builds are intended to improve things on the Pi 3, but they're very new
and I'd like at least a few folks to boot with them and confirm that
things at the very least aren't any *worse* than before, before we can
pull them into the release.

If you could post feedback for the bcm283x-firmware build to the
update:
https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3

and feedback for the kernel build to this bug:

https://bugzilla.redhat.com/show_bug.cgi?id=1570983

that'd be awesome. Thanks a lot, folks!
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@lists.fedorapr

[Peter Robinson]

On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson

Post by Adam Williamson
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel)
https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both
builds are intended to improve things on the Pi 3, but they're very new

Primarily on the 3+

Post by Adam Williamson
and I'd like at least a few folks to boot with them and confirm that
things at the very least aren't any *worse* than before, before we can
pull them into the release.
If you could post feedback for the bcm283x-firmware build to the
https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
_______________________________________________

_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubsc

[RENARD Pierre-Francois]

Post by Peter Robinson
On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson

Post by Adam Williamson
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel)
https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both
builds are intended to improve things on the Pi 3, but they're very new

Primarily on the 3+

Post by Adam Williamson
and I'd like at least a few folks to boot with them and confirm that
things at the very least aren't any *worse* than before, before we can
pull them into the release.
If you could post feedback for the bcm283x-firmware build to the
https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
_______________________________________________

_______________________________________________

upgrade done on a PI3B, ongoing on 2 PI3B+

all on fresh installed aarch64 systems from 20180424 image

_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-***@li

[RENARD Pierre-Francois]

Post by RENARD Pierre-Francois

Post by Peter Robinson
On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson

Post by Adam Williamson
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel)
https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both
builds are intended to improve things on the Pi 3, but they're very new

Primarily on the 3+

Post by Adam Williamson
and I'd like at least a few folks to boot with them and confirm that
things at the very least aren't any *worse* than before, before we can
pull them into the release.
If you could post feedback for the bcm283x-firmware build to the
https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
_______________________________________________

_______________________________________________

upgrade done on a PI3B, ongoing on 2 PI3B+
all on fresh installed aarch64 systems from 20180424 image

So far so good :)

fresh install + dnf upgrade + dnf install of few packages

do you have anything to test ?

Fox

_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send an email to arm-l

[Peter Robinson]

On Wed, Apr 25, 2018 at 10:51 PM, RENARD Pierre-Francois

Post by RENARD Pierre-Francois

Post by RENARD Pierre-Francois

Post by Peter Robinson
On Tue, Apr 24, 2018 at 8:23 PM, Adam Williamson

Post by Adam Williamson
Hi folks!
It'd be great if anyone with a Raspberry Pi 3 could test out a couple
https://koji.fedoraproject.org/koji/buildinfo?buildID=1074979 (kernel)
https://koji.fedoraproject.org/koji/buildinfo?buildID=1072875 (bcm283x-firmware)
like, soon - within the next couple of hours would be great. Both
builds are intended to improve things on the Pi 3, but they're very new

Primarily on the 3+

Post by Adam Williamson
and I'd like at least a few folks to boot with them and confirm that
things at the very least aren't any *worse* than before, before we can
pull them into the release.
If you could post feedback for the bcm283x-firmware build to the
https://bodhi.fedoraproject.org/updates/FEDORA-2018-142a31fda3
https://bugzilla.redhat.com/show_bug.cgi?id=1570983
that'd be awesome. Thanks a lot, folks!
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net
_______________________________________________

_______________________________________________

upgrade done on a PI3B, ongoing on 2 PI3B+
all on fresh installed aarch64 systems from 20180424 image

So far so good :)
fresh install + dnf upgrade + dnf install of few packages
do you have anything to test ?

The kernel has now gone stable. So for that bit I believe we're now
good. You might want to check out #fedora-qa IRC channel if you want
up to date testing needed, it all happens pretty fast.

Peter
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscrib