[fedora-arm] Fedora ARM Minimal not booting RPi2

[Davi Garcia]

Hi all,

I'm trying to use the latest Fedora ARM Minimal image (26-1.5) with my RPi2
but it gets stuck at rainbow screen. I tested the same device, with the
same sdcard and power supply, but with Raspibian and the problem doesn't
happen.

I'm using the following CLI to burn the image:

# fedora-arm-image-installer --image=Fedora.xz --target=rpi2
--media=/dev/mmcblk0


Any advice?

Regards,
Davi Garcia

[Peter Robinson]

Post by Davi Garcia
Hi all,
I'm trying to use the latest Fedora ARM Minimal image (26-1.5) with my RPi2
but it gets stuck at rainbow screen. I tested the same device, with the same
sdcard and power supply, but with Raspibian and the problem doesn't happen.
# fedora-arm-image-installer --image=Fedora.xz --target=rpi2
--media=/dev/mmcblk0
Any advice?

The rainbow screen indicates a couple of things, a non bootable image,
a not powerful enough PSU (what amps is it?) or not a RPi 2/3 (what is
the version number on the circuit board?).

Peter
_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubs

[Davi Garcia]

Hi Peter,

Thanks for your reply!

I already tested with different 2A power sources, so I'm sure that this was
not the problem. But I just discovered the issue... I was using my old RPi
B+ and not my RPi2 (facepalm)!

Regards,
Davi Garcia

Post by Davi Garcia

Post by Davi Garcia
Hi all,
I'm trying to use the latest Fedora ARM Minimal image (26-1.5) with my

RPi2

Post by Davi Garcia
but it gets stuck at rainbow screen. I tested the same device, with the

same

Post by Davi Garcia
sdcard and power supply, but with Raspibian and the problem doesn't

happen.

Post by Davi Garcia
# fedora-arm-image-installer --image=Fedora.xz --target=rpi2
--media=/dev/mmcblk0
Any advice?

The rainbow screen indicates a couple of things, a non bootable image,
a not powerful enough PSU (what amps is it?) or not a RPi 2/3 (what is
the version number on the circuit board?).
Peter

[Peter Robinson]

Post by Davi Garcia
Hi Peter,
Thanks for your reply!
I already tested with different 2A power sources, so I'm sure that this was
not the problem. But I just discovered the issue... I was using my old RPi
B+ and not my RPi2 (facepalm)!

That was actually my first guess ;-)

Post by Davi Garcia
Regards,
Davi Garcia

Post by Peter Robinson

Post by Davi Garcia
Hi all,
I'm trying to use the latest Fedora ARM Minimal image (26-1.5) with my RPi2
but it gets stuck at rainbow screen. I tested the same device, with the same
sdcard and power supply, but with Raspibian and the problem doesn't happen.
# fedora-arm-image-installer --image=Fedora.xz --target=rpi2
--media=/dev/mmcblk0
Any advice?

The rainbow screen indicates a couple of things, a non bootable image,
a not powerful enough PSU (what amps is it?) or not a RPi 2/3 (what is
the version number on the circuit board?).
Peter

_______________________________________________
arm mailing list -- ***@lists.fedoraproject.org
To unsubscribe send